Preparing your datasheet

CXL 130-1LW-SS-Ex

ATEX certified, 0 dBd, Omnidirectional Base Station Antenna for the International 118 - 137 MHz Band in Hazardous areas

Description

CXL 130-1LW-SS-Ex is a 0 dBd, vertically polarized, omnidirectional base station antenna witch covers the 118 – 137 MHz band in Hazardous areas.
The antenna is specified as an ATEX antenna for use in zone 2 in potentially explosive areas.
Before installing the antenna, please read the ATEX Product Manual carefully.
The antenna is suitable for use in gas groups IIA, IIB and IIC in zone 2.
It’s only necessary to install an ATEX grounding Kit on the LW-SS-Ex bracket, when the point of installation has a different electrical potential than the system.
The antenna is a broad-banded ½ λ dipole design.
The accompanying U-bolts and fittings are made of stainless steel.
The antenna element is sealed in high-quality glass fibre tube.
All metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.

Specification

Electrical
Model	CXL 130-1LW-SS-Ex
Frequency	118 – 137 MHz
Antenna Type	Coaxial dipole, broad-banded
Special spec. info	Max. RF Input Power due to max. EIRP in ATEX Environment *: Group IIA : 35.6 dBm (3.6 W) Group IIB : 33.3 dBm (2.1 W) Group IIC : 30.8 dBm (1.2 W)
3 dB Beamwidth, H-Plane	Omnidirectional
Polarisation	Vertical
Pattern Type	Omnidirectional
3 dB Beamwidth, E-Plane	80 °
Impedance	50 Ω
Gain	0 dBd (2.2 dBi)
VSWR	< 1.75:1
Bandwidth	19 MHz
Antistatic Protection	All metal parts DC-grounded (Connector shows a DC-short)
HCM Code(s)	HCM000ND00, 040DE00

Environmental
Operating temperature range	-30 °C to +60 °C
Survival Wind Speed	200 km/h
Ingress Protection	IP66

Mechanical
Connector Torque	N(f) : 0.7 – 1.1 Nm
Wind Area	0.023 sq. m / 0.25 sq. ft
Materials	Radome : Polyurethane-coated glass fibre Mounting bracket : Stainless acid-proof steel (AiSi 316L) U-bolt and fittings : Stainless steel (AiSi 316)
Installation Torque	3 Nm
Colour	Blue (RAL 5015)
Historic Brand	Amphenol Procom
Height	Approx. 1500 mm / 59.06 in.
Wind Load	29 N (160 km/h)
Dia. At Top End	17 mm / 0.67 in.
Weight	Approx. 1.25 kg / 2.76 lb.
Dia. At Bottom End	23 mm / 0.91 in.
Mounting	On 16 to 54 mm / 0.63 – 2.13 in. dia. mast tube
ATEX Marking	II 3G Ex nA IIC T6

Ordering Codes

Model	Product No.
ATEX certified, 0 dBd, Omnidirectional Base Station Antenna for the International 118 – 137 MHz Band in Hazardous areas	115000001

Additional Information

ATEX GROUP	MAX. EIRP POWER	ANTENNA GAIN	MAX INPUT POWER
IIA	37.7 dBm (6.0 W)	0 dBd / 2.15 dBi	35.6 dBm (3.6 W)
IIB	35.4 dBm (3.5 W)	0 dBd / 2.15 dBi	33.3 dBm (2.1 W)
IIC	33.0 dBm (2.0 W)	0 dBd / 2.15 dBi	30.8 dBm (1.2 W)

PROCOM A/S reserves the right to amend specifications without prior notice

PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark

Generated : 2026-06-24 Version 1