Preparing your datasheet

CXL 2400-3LW-SS-Ex

ATEX certified, 3 dBd, Omnidirectional Base Station Antenna for the 2200 - 2700 MHz Band in Hazardous areas
Description
  • CXL 2400-3LW-SS-Ex is a 3 dBd, vertically polarized, omnidirectional base station Antenna which covers the 2200 – 2700 MHz band in four models.
  • The antenna is specified as an ATEX antenna for use in zone 2 in potentially explosive areas.
  • Before installing the antenna, please read the ATEX Product Manual carefully.
  • The antenna is suitable for use in gas groups IIA, IIB and IIC in zone 2.
  • It’s only necessary to install an ATEX grounding Kit on the LW-SS-Ex bracket, when the point of installation has a different electrical potential than the system.
  • The accompanying U-bolts and fittings are made of stainless steel.
  • The antenna element is sealed in a high-quality glass fibre tube.
  • All metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.
Specification
Electrical
Model CXL 2400-3LW-SS-Ex
Frequency 100 – 200 MHz wide frequency segments within
2200 – 2700 MHz. See ordering designations
Antenna Type Coaxial, broad-band, collinear antenna
Special spec. info Max. RF Input Power due to max. EIRP in ATEX Environment *:

Group IIA : 32.6 dBm (1.8 W)
Group IIB : 30.3 dBm (1.0 W)
Group IIC : 27.8 dBm (0.6 W)
Polarisation Vertical
Impedance 50 Ω
Gain 5 dBi 3 dBd
VSWR ≤ 2.0, typ. ≤ 1.5
Bandwidth For l, m and h models : ≥ 200 MHz @ VSWR ≤ 2.0
For ll-model: ≥ 100 MHz @ VSWR ≤ 2.0
Antistatic Protection All metal parts DC-grounded (Connector shows a DC-short)
HCM Code(s) HCM000ND00, 015DE40
Half Power Beamwidth 22°
Environmental
Operating temperature range -30 °C to +60 °C
Survival Wind Speed 200 km/h
Ingress Protection IP66
Mechanical
Connector Torque N(f) : 0.7 – 1.1 Nm
Materials Radome: Polyurethane-coated glass fibre
Mounting bracket: Stainless acid-proof steel (AiSi 316L)
U-bolt and fittings: Stainless steel (AiSi 316)
Installation Torque 3 Nm
Colour Blue
Max. Wind Speed 200 km/h / 124.27 mph.
Historic Brand Amphenol Procom
Height Approx. 700 mm / 27.56 in.
Wind Load Approx. 26 N @ 160 km/h / 99.42 mph.
Wind Surface Approx. 0.02 m² / 0.22 ft²
Dia. At Top End 22 mm / 0.87 in.
Weight Approx. 850 g / 1.87 lb.
Dia. At Bottom End 23 mm / 0.91 in.
Mounting On 16 to 54 mm / 0.63 – 2.13 in. dia. mast tube
ATEX Marking II 3G Ex nA IIC T6
Ordering Codes
Model Product No. Frequency

CXL 2400-3LW-SS-Ex/ll

 Contact_100 2200 – 2300 MHz

CXL 2400-3LW-SS-Ex/l

 Contact_101 2300 – 2500 MHz

CXL 2400-3LW-SS-Ex/m

 115000022 2400 – 2600 MHz

CXL 2400-3LW-SS-Ex/h

 Contact_102 2500 – 2700 MHz

CXL 2400-3LW-SS-Ex/h

 Contact_76 2500 – 2700 MHz
Additional Information
Calculation of max. Antenna input power in different ATEX groups
ATEX GROUPMAX. EIRP POWERANTENNA GAINMAX INPUT POWER
IIA 37.7 dBm (6.0 W) 3 dBd / 5.15 dBi 32.6 dBm (1.8 W)
IIB 35.4 dBm (3.5 W) 3 dBd / 5.15 dBi 30.3 dBm (1.0 W)
IIC 33.0 dBm (2.0 W) 3 dBd / 5.15 dBi 27.8 dBm (0.6 W)

*See the ATEX Product Manual (safety and mounting instructions) and related EU DECLARATION OF CONFORMITY ATEX Directive 2014/34/EU.

Mounting Details

LW-SS-Ex-beslag mont iso GB 280x

Typical Gain and VSWR Curve

CXL 2400 3LW SS Ex VSWR

Typical Radition Pattern (E-Plane)

Udstralling 3 dB E

Typical Radition Pattern (H-Plane)

Udstraling 3 dB H

PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-25 Version 1