Preparing your datasheet

DPF 70/6-XL

6-cavity duplexer for the 350 MHz band
Description
  • The DPF 70/6-XL is a 6-cavity duplex filter for duplex transceivers.
  • The DPF 70/6-XL can be adjusted within the complete 340 – 400 MHz band. The duplexer can be supplied in four different versions according to duplex spacing required.
    Also see “Ordering information” below
  • The DPF 70/6-XL is primarily intended for equipment with Tx and Rx operating on single frequencies, but it can also, however with slightly reduced data, be used where the Tx and Rx operate on several channels, i.e. within a certain port bandwidth. In the last case, factory tuning is recommended.
  • The filter uses full-length ¼ cavities in a compact, extruded aluminium housing. The chassis is made of passivated steel and teflon insulation has been applied in the coaxial cables and in the connectors.
  • The filter is black vinyl coated to prevent corrosion.
Specification
Electrical
Model DPF 70/6-XL
Frequency 340 – 400 MHz
Max. Input Power 50 W
Special spec. info
Single-channel tuned :Multi-channel tuned
BW = 2 MHz :
Insertion Loss Tx-Ant and Ant-Rx
≤ 1.2 dB (typ. 1.0 dB≤ 1.2 dB (typ. 1.0 dB)
(at 10 MHz duplex spacing)
Tx Noise Suppression on Rx Frequency
≥ 85 dB≥ 65 dB
Isolation Rx on Frequency Tx
≥ 85 dB≥ 65 dB
Impedance 50 Ω
VSWR < 1.5:1
Environmental
Frequency Stability Approx. 4.5 ppm / °C
Operating temperature range -30 °C to +60 °C
Mechanical
Connection(s) N(f)
(BNC(f), TNC(f), UHF(f) or SMA(f) on request)
Historic Brand Amphenol Procom
Dimensions 243 x 154 x 33 mm / 9.5 x 6.0 x 1.3 in.
Weight Approx. 1.123 kg / 2.48 lb.
Ordering Codes
Model Product No. Frequency

DPF 70/6-XL-5/7-N(f)

200000423 5 – 7 MHz

DPF 70/6-XL-7/9-N(f)

200001635 7 – 9 MHz

DPF 70/6-XL-9/13-N(f)

200001794 9 – 13 MHz

DPF 70/6-XL-13/16-N(f)

200002705 13 – 16 MHz
PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-26 Version 1