Preparing your datasheet

GF 151

0 dB Mobile GlassFix® Antenna for the 160 MHz Band
Description
  • Half-wave, 0 dB mobile antenna for the 2 m band using the GlassFix® mounting principle.
  • Mounting on car window glass – no holes required.
  • Double-adhesion procedure ensures fast and reliable fixing.
  • Internal matching unit feeds external antenna through window glass.
  • Half-wave design – no ground plane required.
  • High positioning gives performance equal to conventionally mounted car roof antenna.
  • FME FastCabling system (cable to be ordered separately).
  • Simple tuning procedure by means of tuning screw on matching unit.
  • Easy removable whip for car wash.
  • Swivel joint for 180° angle adjustment.
  • If removal of antenna installation is necessary, a quick dismantling procedure leaves no trace of the installation.
  • NOTE
  • GF antennas are not suitable for car models with windows that have heat reflective coating.
Specification
Electrical
Model GF 151
Frequency Tunable 138…175 MHz
Antenna Type Mobile GlassFix® antenna
Max. Input Power 25 W
Polarisation Vertical
Impedance 50 Ω
VSWR < 1.3 @ f. res.
Bandwidth > 6 MHz @ VSWR < 1.5
> 10 MHz @ VSWR < 2.0
Gain (EIA RS-329-1) 0 dB
Mechanical
Materials Whip : Stainless steel and brass, black-chromed
Mount and indoor unit : Weather- and shockproof plastics
Corrosion-safe and corrosion-protected metals
Cable FME-cable to be ordered separately
Colour Black
Historic Brand Amphenol Procom
Antenna Mount Type Glass Mount
Height Approx. 92 cm / 36.22 in.
Weight Approx. 0.09 kg / 0.20 lb.
Mounting On car windows with silicone glue
(52 mm x 47 mm obstruction-free mounting area required)
Glass Thickness 2.5 – 7 mm / 0.10 – 0.28 in.
Ordering Codes
Model Product No.
0 dB Mobile GlassFix® Antenna for the 160 MHz Band 130000704
Additional Information
FME-System Accessories
FME-CABLES
TYPE PRODUCT NO.
1 m FME 130000437
2 m FME 130000447
3 m FME 130000457
4 m FME 130000466
5 m FME 130000474
6 m FME 130000483
4 m FME-white 110000064
6 m FME-white 110000066
12 m FME-white 110000068
18 m FME-white 110000069
FME-CONNECTORS
TYPE PRODUCT NO.
FME-FME 130000583
FME-P
(Prolongation)		 130000565
FME-N 130000571
FME-FSMA
(Female-SMA)		 130000578
FME-BNC 130000566
FME-TNC 130000569
FME-UHF 130000572
FME-MUHF
(Mini-UHF)		 130000573
FME-EMUHF
(Elbow-MUHF)		 130000582
FME-EBNC
(Elbow-BNC)		 130000580
FME-SMA 130000577

For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories.

1. Before Installation
  • When selecting mounting location take into consideration: positions of back view mirror, wiper blade paths and defogger wires (when mounting on rear window).
    The driver’s view should not be obstructed.
  • Max. allowed curvature of the glass surface on the mounting spot is 2 mm deflection per 100 mm length.
  • Environmental- and car temperature must be above 15° C at installation, and surfaces to be glued must be dry and clean.
2. Installation

GF 2 70 151 230 401 2 4 5 instal GB

Do not use sealer on rubber gasket or other places.

3. After Installation
  • Allow the silicone gluings to dry off 2 hours at a temperature above 15° C. To ensure full strength of the glue, it is recommended to keep the whip off the mount for 24 hours.

4. TUNING INSTRUCTIONS

  • Insert a forward/reflection-type wattmeter between the transmitter and the antenna.
  • Key the transmitter and observe the forward and the reflected power.
  • Adjust the tuning screw on the matching unit until minimum returned power is obtained.

REINSTALLATION KIT

A reinstallation kit including all necessary parts for transfer of the antenna to another vehicle is available under order No. »GF-RK«.

Warning

SAFETY PRECAUTIONS

Antennas mounted on the windscreen may cause relatively high field strengths in the passenger cabin and near the dashboard.

1. To prevent health hazard due to RF radiation, persons must not be closer than 30 cm to the antenna whip (transmitter output power to the matching unit: 20 W). (DIN 57 848).

2. The RF signals at the dashboard may cause interference in the car’s electronic equipment such as broadcast radio, computer automatics, braking systems, electronic ignition, relays etc. Some cars are more susceptible to disturbances than others. It is the responsibility of the installer to carry out a thorough check of the proper functioning under any conditions of such circuits before finishing installation.

The enclosed silicone adhesive contains acetic acid and fungicides. Keep out of reach of children and dispose properly.

Assembly Details

Detail GF m lim GB

PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-26 Version 1