| Electrical | |
| Model | GF 404/… |
|---|---|
| Frequency | 450 MHz-band covered by three tunable models |
| Antenna Type | Collinear mobile GlassFix® antenna |
| Max. Input Power | 25 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f.res. |
| Bandwidth |
≥ 8 MHz @ VSWR ≤ 2.0≥ 15 MHz @ VSWR ≤ 3.0
|
| Gain (EIA RS-329-1) | 3 dB |
| Mechanical | |
| Materials | Whip : Stainless steel and black-chromed brass Mount and indoor unit : Weather- and shockproof plastics Corrosion-safe and corrosion-protected metals |
|---|---|
| Cable | FME-cable to be ordered separately |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Glass Mount |
| Height | Approx. 78 mm / 3.07 in. |
| Weight | Approx. 0.1 kg / 0.22 lb. |
| Mounting | On car windows with silicone glue (52 mm x 47 mm obstruction-free mounting area required) |
| Glass Thickness | 2.5 – 7 mm / 0.10 – 0.28 in. |
| Model | Product No. | Frequency |
|---|---|---|
|
GF 404/s |
130000786 | 380 – 410 MHz |
|
GF 404/l |
130000787 | 406 – 440 MHz |
|
GF 404/h |
130000784 | 430 … 470 MHz |
Do not use sealer on rubber gasket or other places.
Allow the silicone gluings to dry off 2 hours at a temperature above 15 °C. To ensure full strength of the glue, it is recommended to keep the whip off the mount for 24 hours.
A reinstallation kit including all necessary parts for transfer of the antenna to another vehicle is available under order No. »GF-RK« (130000329).
Antennas mounted on the windscreen may cause relatively high field strengths in the passenger cabin and near the dashboard.
1. To prevent health hazard due to RF radiation, persons must not be closer than 30 cm to the antenna whip (transmitter output power to the matching unit: 20 W). (DIN 57 848).
2. The RF signals at the dashboard may cause interference in electronic equipment such as broadcast radio, computer automatics, braking systems, electronic ignition, relays etc. Some cars are more susceptible to disturbances than others. It is the responsibility of the installer to carry out a thorough check of the proper functioning under any conditions of such circuits before finishing installation.
The supplied silicone adhesive contains acetic acid and fungicides. Keep out of reach of children and dispose properly.
| FME-CABLES | |
|---|---|
| TYPE | PRODUCT NO. |
| 1 m FME | 130000437 |
| 2 m FME | 130000447 |
| 3 m FME | 130000457 |
| 4 m FME | 130000466 |
| 5 m FME | 130000474 |
| 6 m FME | 130000483 |
| 4 m FME-white | 110000064 |
| 6 m FME-white | 110000066 |
| 12 m FME-white | 110000068 |
| 18 m FME-white | 110000069 |
| FME-CONNECTORS | |
|---|---|
| TYPE | PRODUCT NO. |
| FME-FME | 130000583 |
| FME-P (Prolongation) |
130000565 |
| FME-N | 130000571 |
| FME-FSMA (Female-SMA) |
130000578 |
| FME-BNC | 130000566 |
| FME-TNC | 130000569 |
| FME-UHF | 130000572 |
| FME-MUHF (Mini-UHF) |
130000573 |
| FME-EMUHF (Elbow-MUHF) |
130000582 |
| FME-EBNC (Elbow-BNC) |
130000580 |
| FME-SMA | 130000577 |
For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalouge.
