Preparing your datasheet

GNSS 2020

Active Receiving Antenna for the GPS, GLONASS, BEIDOU and GALILEO
Description
  • Full hemispherical coverage for the GNSS.
  • Built-in high gain, low noise amplifier.
  • Input filter for thorough RF-overload protection.
  • Right-hand circular polarization (RHCP).
  • 3 V – 15 V supply voltage.
  • DC supply via RF-connector.
  • Total design carried out to make the antenna withstand tough environments.
  • Comprehensive range of accessory mounting brackets available.
Specification
Electrical
EMC Full protection (EN 301 489-1)
Power Supply 3 – 15 V DC
Model GNSS 2020
Frequency 1559 – 1610 MHz
Antenna Type Patch Antenna
Polarisation RHCP
Pattern Type Hemispherical
Impedance 50 Ω
Axial Gain 31 dBic (typ.)
Cross Polar Attenuation > 10 dB (typ.)
Environmental
Operating temperature range -40 °C to +70 °C
Survival Wind Speed 200 km/h
Ingress Protection IP67
Mechanical
Insulation Connector ground terminal galvanically insulated from the mounting hardware
Antenna Colour White (RAL 9010)
Wind Area 0.0045 sq. m / 0.05 sq. ft.
Connection(s) N(f)
Materials Antenna dome : Weather-resistant low-loss plastic
Historic Brand Amphenol Procom
Height Approx. 84 mm / 3.3 in.
Wind Load Approx. 3.7 N @ 160 km/h / 99.42 mph.
Diameter 50 mm / 1.97 in.
Weight Approx. 0.25 kg / 0.55 lb.
Mounting Vertical on pipe mast ø 25 – 33 mm / 1.00 – 1.30 in.
on a mounting bracket 35 – 55 mm / 1.38 – 2.17 in.
Ordering Codes
Model Product No. Additional Information

GNSS 2020

112000093 Bracket w. clamps

GNSS 2020-1"

112000094 1″ Mount
PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-26 Version 1