Preparing your datasheet

LNA-GPS line amp

Low Noise Amplifier / Preamplifier for the 1575 MHz GPS band
Description
  • Miniature GPS line amplifier.
  • Suitable for GPS signal distribution network.
  • Built-in band-pass filter to attenuate unwanted signals and clean up the distributed GPS signal.
  • Low input and output VSWR.
  • Low noise figure.
  • Low weight.
  • Wide temperature range.
  • Wide supply voltage range.
  • Low power consumption.
  • DC supplied from phantom voltage on the signal line.
  • Also exists with a DC block on the input.
  • Also available with DC-path from output to input to DC-feed an active GPS antenna or to DC feed more amplifiers in series on the same line.
Specification
Electrical
Power Supply 3 – 15 V DC
Model LNA-GPS line amp-…
Frequency 1575 ±10 MHz
Amp. Gain 24 dB ± 1 dB @ 1575 MHz
Noise Figure < 3.0 dB, Typ 2.5 dB
Output IP3 >+14 dBm
Impedance 50 Ω
P1dB > 0 dBm
VSWR < 3.0:1 (typ. < 1.5:1)
Selectivity See curve
Current Consumption 10 mA
Max. Current 300 mA
Environmental
Operating temperature range -30 °C to +70 °C
Ingress Protection IP52
Mechanical
Connection(s) Input: SMA(f) or TNC(f)
Output: SMA(f)
Colour Black (RAL 9005)
Historic Brand Amphenol Procom
Dimensions 62 x 66 x 19.5 mm / 2.44 x 260 x 0.77
(incl. connectors and flanges)
Weight Approx. 0.065 kg / 0.14 lb.
Ordering Codes
Model Product No. Additional Information

LNA-GPS line amp-SMA-SMA

210001657 No DC path

LNA-GPS line amp-TNC-SMA-0DC

210001163 No DC path

LNA-GPS line amp-SMA-SMA-DC

210001808 DC path between output and input
PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-26 Version 1