FME-System Accessories – Note
For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories.
LX-Mount
Mini Mobile Mount for Antennas up to 2400 MHz
Description
- Professional quality in an elegant and smooth design.
- Wind tunnel optimized pyramidical shape.
- Especially suited for roof-mounting.
- Low installation depth.
- Built-in bendable section for adjustment of the whip (tiltable 15° by hand).
- Internal M5 thread whip-fastening system.
- Total height of only 30 mm – satisfies the EC-directive 79/488/EEC.
- Stainless steel mounting body.
- Provided with FME-connection system – cable to be ordered separately.
- Designed for the future – works up to and beyond 2400 MHz.
- Whips available for communications systems in the frequency range 150 – 2400 MHz.
Specification
| Electrical | |
| Frequency | 150 – 2400 MHz |
|---|---|
| Application | Mount for mobile antennas |
| Mechanical | |
| Installation Diameter | 31.5 mm / 1.24 in. |
|---|---|
| Build-In Depth | Active : 25 mm Passive : 11 mm |
| Connection(s) | FME-connection system (supplied without cable) |
| Materials | Stainless steel Cu-nite brass Environment-proof plastics |
| Installation Torque | 3.5 Nm max. |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Height | Approx. 30 mm / 1.18 in. |
| Whip Connection | M5 internal thread |
| Weight | Approx. 0.022 kg / 0.05 lb. |
| Mounting | 18 mm dia. hole |
| Mounting Plate Thickness | Max. 2 mm |
Ordering Codes
| Model | Product No. |
|---|---|
| Mini Mobile Mount for Antennas up to 2400 MHz | 130000371 |
Additional Information
Installation
The LX-mount is especially suited for roof-mounting. It is recommended to mount the antenna at the centre of the roof toensure the best omnidirectional coverage. Mounting can take place in an 18 mm dia. hole with access from the outside only.A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in directcontact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.When cleaning the car in car-washing machines, the whip should be removed. After wash, the whip is refitted and tightenedlightly.The mount is equipped with a bendable section (±15˚;) to make it possible to adjust the antenna to an upright position.
1. Installation Dimension
2. Installation Steps
Do not use sealer on rubber gasket or other places.
Please Note
When tightening the revolving nut (see picture 4), special care must betaken to keep the spanner in the correct position.
Ordering Designation
Order this mount by simply asking for the LX (or LX-mount). Cable is to be ordered separately.
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1