Preparing your datasheet

MH 1-LXR

¼ λ Mobile Antenna for the 160 MHz Band
Description
  • 0 dB mobile antenna.
  • Black-chromed, conical stainless steel whip.
  • Stainless steel LX-mount – professional quality in elegant and smooth design.
  • Especially suited for roof-mounting.
  • Provided with FME-connection (supplied without cable).
  • Bendable section in mount for adjustment of whip (tiltable 15° by hand).
  • Installation with access from the outside only (requiring an 18 mm dia. hole).
Specification
Electrical
Model MH 1-LXR
Frequency Tunable by cutting within : 144…175 MHz
(Also applicable : 175…480 MHz)
Antenna Type Mobile whip antenna
Max. Input Power 100 W
Polarisation Vertical
Impedance 50 Ω
VSWR ≤ 1.3 @ f. res.
Bandwidth ≥ 15 MHz @ VSWR ≤ 2.0
Gain (EIA RS-329-1) 0 dB
Mechanical
Materials Whip : Black-chromed stainless steel
Black-chromed brass
Mount : Brass
Weather- and shockproof plastics
Stainless steel
Cable FME-cable to be ordered separately
Installation Torque 3.5 Nm max.
Colour Black
Historic Brand Amphenol Procom
Antenna Mount Type Hole Mount
Height Approx. 550 mm / 21.65 in.
Weight Approx. 0.052 kg / 0.11 lb.
Mounting 18 mm dia. hole
Ordering Codes
Model Product No.
¼ λ Mobile Antenna for the 160 MHz Band 130000713
Additional Information
Installation

The LX-mount is especially suited for roof-mounting. It is recommended to mount the antenna at the centre of the roof to ensure the best omnidirectional coverage. Mounting can take place in an 18 mm dia. hole with access from the outside only. When cleaning the car in car-washing machines, the whip should be removed – a 9 mm fork spanner can be used. After wash, the whip is refitted and tightened lightly with the spanner.

The mount is equipped with a bendable section (±15°) to make it possible to adjust the antenna to an upright position.

1. Installation Dimension

LX Mount 18 mål GB

2. Installation Steps

LX Mount inst step samlet GB

Do not use sealer on rubber gasket or other places.
 

PLEASE NOTE:

When tightening the revolving nut (see picture 4), special care must be taken to keep the spanner in the correct position.

3. Tuning / Model Conversion

The antenna should always be tuned using an VSWR-meter.
The cutting diagrams below serve as a guide for this procedure.

PROCOM A/S reserves the right to amend specifications without prior notice
PROCOM A/S • Smedetoften 12 DK 3600 Frederikssund • Denmark
Generated : 2026-06-26 Version 1