The whip is compatible with all below mounts
MH 1-XR, MH 1-XGR, MH 1-CXR, MH 1-MMR
¼ λ Mobile Antenna for the 160 MHz Band
Description
- Black-chromed, conical stainless steel whip.
- Elegant transition between whip and mounting surface due to slim-line mount.
- 30° tiltable whip.
- Stainless steel X-mount with M6-thread whip-fastening system.
- Simple mounting exclusively with access from the outside.
- Models available with X-mount (oblong), XG-mount (oblong with GPS), CX-mount (circular) and MM-mount (magnetic).
- Choose between four connection possibilities:
- X-mount, CX-mount, MM-mount: FME-connection (supplied without cable).
- XP4-mount, CXP4-mount: Permanently attached 4 m cable terminated with FME-connector.
- XG-Combi mount: FME-connection and GPS (supplied without cable).
- XGP4-Combi mount: Permanently attached 4 m cable terminated with FME-connector for whip and 0.15 m RG 178 with MFME for GPS.
- Easily removable whip for car wash.
- GPS-antenna for fixed installations.
- Full hemispherical coverage.
- Built-in high-gain, low-noise amplifier.
- Right-Hand Circular Polarization (RHCP).
- 2.85 V – 5 V supply voltage (typical 3 V).
Specification
| Electrical | |
| Model | MH 1-XR, MH 1-XGR, MH 1-CXR, MH 1-MMR |
|---|---|
| Frequency | Tunable by cutting within : 144…175 MHz (Also applicable : 175…480 MHz) |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 150 W Max. Power for models incl. GPS, is reduced to 30 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f. res. |
| Bandwidth | ≥ 15 MHz @ VSWR ≤ 2.0 |
| Gain (EIA RS-329-1) | 0 dB |
| Mechanical | |
| Materials | Whip : Black-chromed Conical stainless steel Black-chromed brass Mount : Black-chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 4 ±1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type |
Hole MountMagnetic Mount
|
| Height | Approx. 550 mm / 21.65 in. |
| Weight | X-version : Approx. 70 g XP4-version : Approx. 210 g CX-version : Approx. 70 g CXP4-version : Approx. 210 g XG-version : Approx. 90 g XGP4-version : Approx. 230 g MM-version : Approx. 310 g |
Ordering Codes
| Model | Product No. | Additional Information |
|---|---|---|
|
MH 1-XR |
130000708 | X-mount (oblong) with FME-system |
|
MH 1-XP4R |
130000710 | XP4-mount with 4 m cable and FME-connector (oblong) |
|
MH 1-XGR |
130002059 | XG-Combi mount (oblong) with FME-system and GPS |
|
MH 1-XGP4R |
130002063 | XGP4-Combi mount with 4 m cable and FME-connector (oblong) and GPS |
|
MH 1-CXR |
130000709 | CX-mount with FME-system (circular) |
|
MH 1-CXP4R |
130000711 | CXP4-mount with 4 m cable and FME-connector (circular) |
|
MH 1-MMR |
130000707 | MM-mount with FME-system (magnetic) |
Additional Information
Installation and Assembly Instructions
Please refer to the data sheet of each individual mount to find the installation and assembly instructions.
PLEASE NOTE
For safety reasons: Do not operate the MiniMag with antenna whips longer than 60 cm. Please respect the maximum car speed limit corresponding to a particular whip length as appears from the above curve.
Tuning
The antenna should always be tuned using an VSWR-meter.
The cutting diagrams below serve as a guide for this procedure.
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1