The whip is compatible with all below mounts
MH 1-Z
¼ λ Mobile Antenna for the 160 MHz Band
Description
- Sturdy, general-purpose ¼ λ antenna in professional quality.
- Available with glass fiber or stainless steel whip.
- Stainless steel Z-mount with ball-joint and wing screw whip-fastening system.
- Available with bright or black-chromed metal parts (mount and whip):
- MH 1-Z…: Bright version
- MH 1-BZ…: Black version
- Simple mounting exclusively with access from the outside.
- Models with roof thickness from 2 mm to 7.5 mm mounting from the inside.
- Choice between two connection principles:
- Z-mount: FME-connection (supplied without cable).
- ZP4-mount: Permanently attached 4 m cable terminated with FME-connector.
Specification
| Electrical | |
| Model | MH 1-Z |
|---|---|
| Frequency | Tunable by cutting within : 144…175 MHz (Also applicable : 175…480 MHz) |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 150 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f.res. |
| Bandwidth | ≥ 15 MHz @ VSWR ≤ 2.0 |
| Gain (EIA RS-329-1) | 0 dB |
| Mechanical | |
| Materials | Whip : Conical glass fiber or stainless steel Chromed brass Mount : Chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 7.5 ±1 Nm |
| Colour | Bright or black, see below mounts |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 530 mm / 20.90 in. |
| Weight | Z-version: Approx. 150 g ZP4-version: Approx. 300 g |
| Mounting | 21 mm dia. hole (For roof thicknesses 2 mm up to 7.5 mm mounting hole should be 22 mm dia.) |
| Mounting Plate Thickness | Max. 2.0 mm (Models up to 7.5 mm on request) |
Ordering Codes
| Model | Product No. | Frequency | Additional Information |
|---|---|---|---|
|
MH 1-BZP4 |
130000716 | BZP4-mount with 4 m cable + FME-connector BLACK | Glassfibre Whip |
|
MH 1-Z |
130000714 | Z-mount with FME-system BRIGHT | Glassfibre Whip |
|
MH 1-ZP4 |
130000715 | ZP4-mount with 4 m cable + FME-connector BRIGHT | Glassfibre Whip |
|
MH 1-BZ |
130000719 | Z-mount with FME-system BLACK | Glassfibre Whip |
|
MH 1-BZP4R |
130000717 | BZP4-mount with 4 m cable + FME-connector BLACK | Stainless Steel Whip |
|
MH 1-ZR |
130000720 | Z-mount with FME-system BRIGHT | Stainless Steel Whip |
|
MH 1-ZP4R |
130000721 | ZP4-mount with 4 m cable + FME-connector BRIGHT | Stainless Steel Whip |
|
MH 1-BZR |
130000725 | Z-mount with FME-system BLACK | Stainless Steel Whip |
Additional Information
Installation
This antenna is provided with type Z-mount. The whip is fastened to the mount by means of our standard ball-joint and wing screw system. The adjustable ball-joint ensures that the whip can always be mounted in a vertical position independent of the angle of the installation spot.
The Z-mount is particularly well suited for mounting on car-roofs because of its ability to be installed exclusively with access from the outside. The Z-Mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside. However, the antenna can be installed anywhere on the car, as the BZ-mount is equally well suited for mounting on e.g. trunk or wing.
1. Installation Dimension
2. Installation Steps
Do not use sealer on rubber gasket or other places.
3. Tuning
The antenna should always be tuned using an VSWR-meter.
The cutting diagrams below serve as a guide for this procedure.
Glass Fibre Whip Glass
Stainless Steel Whip
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1