The whip is compatible with all below mounts
MH 2-ZG
¼ λ Mobile Antenna with Shock Spring for the 160 MHz Band
Description
- Sturdy, general-purpose ¼ λ antenna in professional quality.
- Available with glass fiber or stainless steel whip.
- Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
- Simple mounting exclusively with access from the outside.
- Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable).
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.
Specification
| Electrical | |
| Model | MH 2-ZG |
|---|---|
| Frequency | Tunable by cutting within : 144 – 175 MHz (Also applicable : 175 – 225 MHz) |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 150 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f. res. |
| Bandwidth | ≥ 15 MHz @ VSWR ≤ 2.0 |
| Gain (EIA RS-329-1) | 0 dB |
| Mechanical | |
| Materials | Whip : Conical glass fiber or black-chromed stainless steel. Black-chromed brass Spring : Black-chromed stainless steel Mount : Black-chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 7.5 ±1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 550 mm / 21.65 in. |
| Weight | ZG-version : Approx. 0.20 kg ZGP4-version : Approx. 0.35 kg |
| Mounting | 21 mm dia. hole |
Ordering Codes
| Model | Product No. | Frequency | Additional Information |
|---|---|---|---|
|
MH 2-ZGR |
130000738 | ZG-mount with FME-system | Stainless Steel Whip |
|
MH 2-ZGP4R |
130000739 | ZGP4-mount with 4 m cable and FME-connector | Stainless Steel Whip |
|
MH 2-ZG |
130000736 | ZG-mount with FME-system | Glassfibre Whip |
|
MH 2-ZGP4 |
130000737 | ZGP4-mount with 4 m cable and FME-connector | Glassfibre Whip |
Additional Information
Installation
This antenna is provided with our type ZG-mount for mounting from the outside in a 21 mm dia. hole on horizontal surfaces as e.g. roof top or trunk lid.
The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low-profile mobile mount with a slim appearance and with protection against theft of the antenna whip.
When cleaning the car in automatic washing machines, the whip is easily removed using a spanner, size 12 mm. The whip is refitted again by screwing it onto the M8 x 1 thread stud and tightening it with the spanner.
1. Installation Dimension
Build-in depth : 10.5 mm
2. Installation Steps
Do not use sealer on rubber gasket or other places.
3.Tuning
The antenna should always be tuned using an VSWR-meter.
The cutting diagrams below serve as a guide for this procedure.
Stainless Steel Whip
Glass Fibre Whip
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1