The whip is compatible with all below mounts
ML 1-ZG
¼ λ Mobile Antenna with Shock Spring for the 80 MHz Band
Description
- Sturdy, general-purpose ¼ λ antenna in professional quality.
- Available with glass fiber or stainless steel whip.
- Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
- Simple mounting exclusively with access from the outside.
- Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable).
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.
Specification
| Electrical | |
| Model | ML 1-ZG |
|---|---|
| Frequency | Tunable by cutting within : 66 … 88 MHz (Also applicable : 88 … 175 MHz) |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 250 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f. res. |
| Bandwidth | ≥ 8 MHz @ VSWR ≤ 2.0 |
| Gain (EIA RS-329-1) | 0 dB |
| Mechanical | |
| Materials | Whip : Conical glass fiber or black-chromed stainless steel. Black-chromed brass Spring : Black-chromed stainless steel Mount : Black-chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 7.5 ±1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 1100 mm / 43.31 in. |
| Weight | ZG-version : Approx. 210 g / 0.46 lb. ZGP4-version : Approx. 360 g / 0.8 lb. |
| Mounting | 21 mm dia. hole |
Ordering Codes
| Model | Product No. | Frequency | Additional Information |
|---|---|---|---|
|
ML 1-ZGR |
130000611 | ZG-mount with FME-system | Stainless Steel Whip |
|
ML 1-ZGP4R |
130000612 | ZGP4-mount with 4 m cable and FME-connector | Stainless Steel Whip |
|
ML 1-ZG |
130000609 | ZG-mount with FME-system | Glassfibre Whip |
|
ML 1-ZGP4 |
130000610 | ZGP4-mount with 4 m cable and FME-connector | Glassfibre Whip |
Additional Information
Installation
This antenna is supplied with our type ZG-mount for mounting from the outside in a 21 mm dia. hole on horizontal surfaces as e.g. roof top or trunk lid.
The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low-profile mobile mount with a slim appearance and with protection against theft of the antenna whip.
When cleaning the car in automatic washing machines, the whip is easily removed using a spanner size 12 mm. The whip is refitted again by screwing it onto the M8 x 1 thread stud and tightening it with the spanner.
1. Installation Dimensions
2. Instalation Steps
Do not use sealer on rubber gasket or other places.
3. Tuning
The antenna should always be tuned using an VSWR-meter.
The cutting diagrams below serve as a guide for this procedure.
Glass Fibre Whip
Stainless Steel Whip
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1