The whip is compatible with all below mounts
ML 1-ZR/160/BBMU/…
160 MHz 2 dB Mobile Antenna for Glass Fibre Roof
Description
- Sturdy ½ λ mobile antenna in professional industry standard quality.
- Groundplane independent antenna for mounting on non-conducting surfaces.
- Ideal for glass fibre roofs as can be found on some trucks, lorries, transport vans, busses and farm machinery.
- The ML 1-ZR/160/BBMU/… can be tuned from 144 – 175 MHz via the adapter box.
- Necessary cable length between the adapter box and the mount:
- 100 mm (FME junction cable included).
- Simple mounting exclusively with access from the outside. Models with roof thickness from 2 mm to 7.5 mm mounting from the inside.
- FME antenna cable can be mounted directly in the adapter box.
Specification
| Electrical | |
| Model | ML 1-ZR/160/BBMU/… |
|---|---|
| Frequency | Tunable within 144 – 175 MHz |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 25 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3:1 @ f. res. |
| Bandwidth | ≥ 4 MHz @ VSWR ≤ 2.0 ≥ 6 MHz @ VSWR ≤ 3.0 |
| Gain (EIA RS-329-1) | 2 dB |
| Mechanical | |
| Materials | Whip : Stainless steel, Chromed brass Spring : Stainless steel Mount : Chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 7.5 ±1 Nm |
| Colour | Bright/black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Dimensions | Antenna : Approx. 800 mm Matching unit : 50 x 50 x 20 mm FME junction cable : 100 mm |
| Mounting | 21 mm dia. hole (For roof thickness 2 mm up to 7.5 mm mounting hole should be 22 mm dia.) |
| Mounting Plate Thickness | 0.5 – 2 mm and 5 – 7.5 mm respectively depending on mounting ring |
Ordering Codes
| Model | Product No. |
|---|---|
| 160 MHz 2 dB Mobile Antenna for Glass Fibre Roof | 130000627 |
Additional Information
Installation
- Mount and adapter box to be connected by means of the 100 mm junction cable included in the supply.
- Connect the FME cable for the radio station to the adapter box.
- The Z-mount is particularly well suited for mounting on car-roofs because of its ability to be installed exclusively with access from the outside. The Mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside. However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.
- Adjust the frequency by means of an VSWR-analyzer via C1 and C2 on the adapter box.
1. Installation Dimension
2. Installation Steps
Do not use sealer on rubber gasket or other places.
3. Tuning
VSWR 4000 Analyser with built-in signal generator and graphic display range of measurement 30-2700 MHz
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1