MU 2404/UMTS-LX - Datasheet

Description

Mobile antenna for the UMTS band (1900 – 2200 MHz).
Colinear, stainless steel whip.
2 dB gain compared to a ¼ λ whip.
Stainless steel LX-mount – professional quality in elegant and smooth design.
‘Especially suited for roof-mounting.
Provided with FME-connection (supplied without cable).
Bendable section in mount for adjustment of whip (tiltable 15° by hand).
Installation with access from the outside only (requiring an
18 mm dia. hole).

Specification

Electrical
Model	MU 2404/UMTS-LX
Frequency	UMTS band (1900 – 2200 MHz)
Antenna Type	Collinear mobile antenna
Max. Input Power	25 W
Polarisation	Vertical
Impedance	50 Ω
VSWR	≤ 2.0 @ f. res.
Bandwidth	≥ 200 MHz @ VSWR ≤ 2.25
Gain (EIA RS-329-1)	2 dB

Mechanical
Materials	Whip : Black-chromed stainless steel Black-chromed brass Mount : Stainless steel Cu-nite brass Environment-proof plastics
Cable	FME-cable to be ordered separately
Installation Torque	3.5 Nm max.
Colour	Black
Historic Brand	Amphenol Procom
Antenna Mount Type	Hole Mount
Height	Approx. 180 mm / 7.09 in.
Weight	Approx. 0.034 kg / 0.07 lb.
Mounting	18 mm dia. hole

Ordering Codes

Model	Product No.
Colinear 2 dB Mobile Antenna for the UMTS Band (1900 – 2200 MHz)	130001274

Additional Information

Installation

The LX-mount is especially suited for roof-mounting. It is recommended to mount the antenna at the centre of the roof to ensure the best omnidirectional coverage. Mounting can take place in an 18 mm dia. hole with access from the outside only.

When cleaning the car in car-washing machines, the whip should be removed – a 9 mm fork spanner can be used. After wash, the whip is refitted and tightened lightly with the spanner.

The mount is equipped with a bendable section (±15°) to make it possible to adjust the antenna to an upright position.

1. Installation Dimension

LX Mount 18 mål GB

2. Installation Steps

LX Mount inst step samlet GB

Do not use sealer on rubber gasket or other places.

3. Tuning

The antenna is delivered factory-tuned and requires no further tuning.

Please Note

When tightening the revolving nut (see picture 4), special care must betaken to keep the spanner in the correct position.