The whip is compatible with all below mounts
MU 5-ZG/…
Unity Gain ¼ λ Mobile Antenna for the 450 MHz Band
Description
- Sturdy, conical, flexible rubber whip.
- MU 5-ZG/s covers 370–410 MHz
- MU 5-ZG/l covers 406–440 MHz
- MU 5-ZG/h covers 430–470 MHz
- – no tuning required.
- Stainless steel ZG-mount with M8-thread whip-fastening system.
- Simple mounting exclusively with access from the outside.
- Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable)
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.
Specification
| Electrical | |
| Model | MU 5-ZG/… |
|---|---|
| Frequency | 450 MHz-band covered by three models |
| Antenna Type | Mobile whip antenna |
| Max. Input Power | 100 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.2:1 @ f. res. |
| Bandwidth | ≥ 45 MHz @ VSWR ≤ 1.5 |
| Gain (EIA RS-329-1) | 0 dB |
| Mechanical | |
| Materials | Whip: Sturdy, flexible rubber with cast-in multicore steel wire radiating element Mount: Black-chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 7.5 ±1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 175 mm / 6.89 in. |
| Weight | ZG-version: Approx. 130 g / 0.29 lb. ZGP4-version: Approx. 270 g / 0.60 lb. |
| Mounting | 21 mm dia. hole |
Ordering Codes
| Model | Product No. | Frequency |
|---|---|---|
|
MU 5-ZG/s |
130001052 | 370 – 410 MHz |
|
MU 5-ZG/l |
130001054 | 406 – 440 MHz |
|
MU 5-ZG/h |
130001055 | 430 – 470 MHz |
|
MU 5-ZGP4/s |
130001058 | 370 – 410 MHz |
|
MU 5-ZGP4/l |
130001056 | 406 – 440 MHz |
|
MU 5-ZGP4/h |
130001057 | 430 – 470 MHz |
Additional Information
Installation
This antenna should always be mounted on the car roof to ensure best omnidirectional coverage. The antenna is provided with our type ZG-mount for mounting from the outside in a 21 mm dia. hole.
The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low-profile mobile mount with a slim appearance and with protection against theft of the antenna whip.
When cleaning the car in car-washing machines, the whip is easily removed using a spanner, size 12 mm. The whip is refitted again by screwing it onto the thread stud and tightening it with the spanner.
1. Installation Dimension
Build-in depth : 10.5 mm
2. Installation Steps
Do not use sealer on rubber gasket or other places.
3. Tuning / Model conversion
The antenna is delivered factory-tuned and requires no further tuning.
To convert an MU 5-ZG/s model into an MU 5-ZG/l model, cut off 14 mm of the top end of the whip.
To convert an MU 5-ZG/l model into an MU 5-ZG/h model, cut off 8 mm of the top end of the whip.
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-26
Version 1