MU 907-ZG/… - Datasheet

Description

Silicone covered flexible steel wire whip.
Type MU 907-ZG/l covers 820 – 905 MHz (e.g. for EAMPS).
Type MU 907-ZG/h covers 870 – 960 MHz (e.g. for ETACS, NMT-900 and EGSM).
Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
Simple mounting exclusively with access from the outside.
Choice between two connection principles:
ZG-mount: FME-connection (supplied without cable).
ZGP4-mount: Permanently attached 4 m low loss cable terminated with FME-connector.

Specification

Electrical
Model	MU 907-ZG/…
Frequency	900 MHz-band covered by two models
Antenna Type	Mobile antenna
Max. Input Power	60 W
Polarisation	Vertical
Impedance	50 Ω
VSWR	≤ 1.2 @ f. res.
Bandwidth	≥ 50 @ VSWR ≤ 1.5 ≥ 170 @ VSWR ≤ 2.0
Gain (EIA RS-329-1)	0 dB

Mechanical
Materials	Whip : Steel wire covered with silicone tubing, Black-chromed brass Mount : Black-chromed brass Weather- and shockproof plastics Stainless steel
Installation Torque	7.5 ±1 Nm
Colour	Black
Historic Brand	Amphenol Procom
Antenna Mount Type	Hole Mount
Height	Approx. 91 mm / 3.58 in.
Weight	ZG-version : Approx. 90 g / 0.2 lb. ZGP4-version : Approx. 230 g / 0.51 lb.
Mounting	21 mm dia. hole

Ordering Codes

Model	Product No.	Frequency	Additional Information
MU 907-ZG/l	130001218	820 – 905 MHz	ZG-mount with FME
MU 907-ZG/h	130001216	870 – 960 MHz	Same mount as above
MU 907-ZGP4/l	130001219	820 – 905 MHz	ZGP4-mount with 4 m cable and FME-connector
MU 907-ZGP4/h	130001217	870 – 960 MHz	Same mount as above

Additional Information

Installation

This antenna should be mounted on the car roof to ensure best omnidirectional coverage. The antenna is provided with our type ZG-mount for mounting from the outside in a 21 mm dia. hole.

The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low-profile mobile mount with a slim appearance and with protection against theft of the antenna whip.

When cleaning the car in car-washing machines, the whip is easily removed using a spanner, size 12 mm. The whip is refitted again by screwing it onto the thread stud and tightening it with the spanner.

1. Installation Dimension

ZG Mount 21 38 130 GB

Build-in depth : 10.5 mm

2. Installation Steps

ZG Mount inst step samlet GB

Do not use sealer on rubber gasket or other places.

3. Tuning

The antenna is delivered factory-tuned and requires no further tuning.

Ordering Note

To help selecting the correct model for a specific cellular net?work please consult the survey of cellular network frequencies under USEFUL DATA in our catalogues.

The whip is compatible with all below mounts

ZG ZGP4 Mount GB