PRO-DIPX 80/100-…

Description

Diplexer for combining or splitting the two ranges 0 – 80 MHz and 100 – 960 MHz.
Chebychev design ensures very high isolation across the whole pass ranges.
High power handling capability.
Low insertion loss.
Low weight.
Wide temperature range.
Milled aluminium box ensures extraordinarily high mechanical strength.
PRO-DIPX 80/100-… is coated with black vinyl to prevent corrosion.
N-connectors on all ports (standard).
Also available with SMA-, TNC- or BNC- connector types.

Specification

Electrical
Model	PRO-DIPX 80/100-…
Frequency	COM-LOW port: 0 – 80 MHz COM-HIGH port: 100 – 960 MHz
Max. Input Power	100W CW simultaneously on both HIGH and LOW port
Insertion Loss	0 – 80 MHz: ≤ 0.6 dB 100 – 960 MHz: ≤ 0.6 dB
Impedance	50 Ω
Isolation	LOW to HIGH port: ≥40 dB
VSWR	< 1.5:1

Environmental
Operating temperature range	-40 °C to +60 °C
Ingress Protection	IP64

Mechanical
Connection(s)	INPUT: N(f) OUTPUT: N(f) (Other types available on request)
Historic Brand	Amphenol Procom
Dimensions	133 x 80 x 31 mm / 5.24 x 3.15 x 1.22 in. (incl. connectors and flanges)
Weight	Approx. 0.38 kg / 0.84 lb.
Mounting	ø4.3 mm / ø0.17 in. (4 holes)

Ordering Codes

Model	Product No.	Model
PRO-DIPX 80/100-N(f)	200002263	PRO-DIPX 80/100-N(f)
PRO-DIPX 80/100-SMA(f)	200002264	PRO-DIPX 80/100-SMA(f)
PRO-DIPX 80/100-TNC(f)	200002265	PRO-DIPX 80/100-TNC(f)
PRO-DIPX 80/100-BNC(f)	200002266	PRO-DIPX 80/100-BNC(f)

Additional Information

Instalation

The PRO-DIPX 80/100-… makes it possible to use only one antenna for the operation of two transceivers (one in each range). See the figure below. The antenna must be a dual-frequency antenna, i.e. it must be resonant on the actual frequencies in the two bands.

The transceivers may be used independently and will have no degrading influence on each other. Typically, the diplexer is installed next to the transceivers and only one cable is used between the diplexer and the antenna. The diplexer is suitable both for base station and mobile use.

The main tasks of the diplexer are to protect the individual receiver input from being destroyed by the transceiver in the contrary band and to ensure a low-loss path between the transceiver and the antenna which is not loaded by the other branch.

The diplexer can be operated together with any set of transceivers operating within the 0 – 80 MHz and 100 – 960 MHz frequency bands.

Typical Response curves

INSERTION LOSS [dB]

PORT ATTENUATION [dB]

Mounting Details

PRO-DIPX 44-56 80-100 130-150 174-200 80-88-Hole

All dimensions are given in mm [in.]