Note
* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.
ProEdge
A 2x2 MIMO LTE and WIFI multi purpose antenna for 2G/3G/4G/5G,
CBRS and WIFI 6E 2.4/4.9-7.2 GHz with optional GNSS
CBRS and WIFI 6E 2.4/4.9-7.2 GHz with optional GNSS
Description
- The ProEdge provides antennas for multiple technologies in fixed or mobile end-point device applications.
- Ideal for Industrial robotics and telemetry, smart metering, autonomous vehicles, smart cities and automated parking, backup and remote terminal data connections.
- In-built 2×2 MIMO antenna for use with LTE/4G (617 – 960 MHz and 1710 – 3800 MHz) up to two WiFi 6E 2.4/4.9-7.2 GHz.
- Optional GNSS antenna for GPS L1, Glonass, Beidou and Galileo.
- Full hemispherical coverage for the GNSS antennas.
- Built-in high gain, low noise amplifier.
- Right-Hand Circular Polarization.
- 3 – 15 V DC for GNSS supply.
- Can be configuered as 2-in-1, 3-in-1, 4-in-1 or 5-in-1.
- DC supply via GNSS RF-connector.
- ECE R118.02 approved cable.
- IP69 Ingress protection.
- IK10 rated enclosure.
Specification
| Electrical | |
| EMC | Full protection (EN 301 489-1) |
|---|---|
| Model | ProEdge |
| Frequency |
617 – 960 MHz1.7 – 2.7 GHz3.4 – 3.8 GHz4.9 – 7.2 GHz
|
| Antenna Type | Mobile Disk Style Antenna |
| Max. Input Power | 25 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| Isolation * |
> 5 dB> 15 dB> 25 dB> 30 dB
|
| VSWR * |
< 2.5:1< 2.0:1< 2.0:1< 2.0:1
|
| Environmental | |
| Operating temperature range | -50 °C to +75 °C |
|---|---|
| Ingress Protection | IP69 |
| Impact Protection | IK10 |
| Mechanical | |
| Compliance | ECE R118.02 approved cables |
|---|---|
| Connection(s) | RG 316 / RG 178, SMA(m) (all antennas) |
| Materials | ASA, Zamak 5 |
| Installation Torque | 4 ± 0.5 Nm |
| Colour | Black (RAL 9005) or White (RAL 9010) |
| Length | 209 mm / 8.23 in. |
| Antenna Mount Type | Hole mount |
| Height | 69 mm / 2.7 In. |
| Width | 79 mm / 3.11 in. |
| Weight | Approx. 550 g. / 1.2 lb. |
| Mounting | 18.5 mm / 0.8 in. dia. hole |
Ordering Codes
| Model | Product No. |
|---|---|
|
A 2×2 MIMO LTE and WIFI multi purpose antenna for 2G/3G/4G/5G, CBRS and WIFI 6E 2.4/4.9-7.2 GHz with optional GNSS |
ProEdge |
Additional Information
Ordering designations
Use the guide below to make the name of the ProEdge you would like to buy.
| Model Name | Cover colour | No. of GNSS | No. of LTE | No. of WIFI antennas | Cable length | Connectors on GNSS | Connectors on LTE | Connectors WIFI |
|---|---|---|---|---|---|---|---|---|
| ProEdge | -W (White) -B (Black) |
Blank -G1 (1x GNSS) |
-L2 (2x LTE antennas) | Blank (No WIFI) -W1 (1x WIFI antenna) -W2 (2x WIFI antennas) |
Blank (approx. 0.3 m / 1 ft cable length) -P5 (5 m / 16.4 ft cable length) |
-S (SMA-M) -FAKRA (on request) |
/S (SMA-M) /FAKRA (on request) |
Blank (no WIFI) /S (SMA-M) /RP-S (Reverse Polarity SMA-M) /FAKRA (on request) |
| Naming Example | ||||||||
| ProEdge | -B | -G1 | -L2 | -W2 | -P5 | -S | /S | /RP-S |
ProEdge-B-G1-L2-W2-P5-S/S/RP-S
Typical Radiation Patterns (650 – 2100 MHz)
Typical Radiation Patterns (2600 – 7000 MHz)
Typical VSWR curve 4G/5G/WiFi port 1 & 2
* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.
Typical Isolation curve 4G/5G/WiFi between port 1 & 2
* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.
Mechanical Outline
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-22
Version 1