Connection Diagram
TFA 4/2/TETRA-FM-S-CXP0.26-BBMU
colinear Mobile Antenna for the 4 m, 2 m, TETRA and FM Bands
Description
- 4-Band Mobile Antenna for the 4 m, 2 m, TETRA and FM Bands.
- Polyethylene-covered flexible whip.
- Black-chromed stainless steel antenna mount (CX-mount) with M6 thread whip-mounting system.
- Bendable section in mount makes whip tiltable 30° by hand.
- Easily removable whip (e.g. for wash tunnels).
- Matching unit (BBMU) included.
Specification
| Electrical | |
| Model | TFA 4/2/TETRA-FM-S-CXP0.26-BBMU |
|---|---|
| Frequency | 4 m : 74.2 – 87.5 MHz 2 m : 167.5 – 174 MHz 70 cm : 380 – 410 MHz FM band : 93 – 108 MHz (Limited in 88 – 93 MHz) |
| Antenna Type | Collinear mobile antenna |
| Max. Input Power | 25 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | 74.2 – 77.7 and 84 – 87.5 MHz : 2.5:1 167.5 – 169.5 and 172 – 174 MHz : 2.0:1 380 – 410 MHz : 2.5:1 |
| Gain (EIA RS-329-1) | 4 m : Approx. -3 dB 2 m : Approx. -4 dB 70 cm : Approx. 2 dB (acc. to EIA RS-329-1) |
| Mechanical | |
| Materials | Whip : Glass fibre whip with copper wire winding, polyethylene-covered Black-chromed brass Spring : Black-chromed stainless steel |
|---|---|
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 670 mm / 26.38 in. |
| Weight | Approx. 0.06 kg / 0.13 lb. |
| Mounting | On the CXP0.26 mount |
Ordering Codes
| Model | Product No. |
|---|---|
| colinear Mobile Antenna for the 4 m, 2 m, TETRA and FM Bands | 130001731 |
Additional Information
Installation
This antenna can be mounted anywhere on the vehicle.
Mounting can take place exclusively with access from the outside when drilling an 18 mm dia. hole. Mounting can take place from the inside by drilling a 14 mm dia. hole. When mounting in a 14 mm dia. hole, remove the bottom plastic ring of the gasket with a sharp cutter.
When cleaning the car in car-washing machines, remove the whip using a spanner, size 9 mm. After wash, refit the whip and tighten it lightly with the spanner.
As the mount is internally equipped with a bendable section, the antenna can always be adjusted to an upright position independent of the tilt angle of the installation spot (up to 30° tilt).
1. Installation Dimension
2. Installation Steps
Do not use sealer on rubber gasket or other places.
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-28
Version 1