FME-System Accessories – Note
For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.
Z-Mount
Low Profile Mobile Antenna Mount with Toggle Joint
Description
- Can be used together with all Amphenol Procom mobile antenna whips provided with toggle joint.
- Installation possible everywhere on the car.
- Particularly well suited for rooftop-mounting because of very low internal protrusion and ability to be installed exclusively with access from the outside. Models with roof thickness from 2 mm to 7.5 mm mounting from the inside.
- Hole diameter: 21 mm.
- Mounting body made of stainless steel !
- Wide variety of antenna whips available in the frequency range up to 470 MHz.
- Choice between two connection principles:
- Z-mount : FME-connection (supplied without cable).
- ZP4-mount : Permanently attached 4 m cable terminated with FME-connector.
- ECE R118.02 approved cable.
- Available in bright or black (black plastic parts for both versions).
Specification
| Electrical | |
| Model | Z-Mount |
|---|---|
| Frequency | 0 – 470 MHz |
| Application | Low-profile mount for mobile antennas |
| Mechanical | |
| Installation Diameter | 38 mm / 1.50 in. |
|---|---|
| Build-In Depth | 10.5 mm |
| Materials | Stainless steel Bright or black chromed brass Weather- and shockproof plastics |
| Installation Torque | 7.5 ± 1 Nm |
| Colour | Black or bright and black |
| Historic Brand | Amphenol Procom |
| Height | Approx. 40 mm / 1.57 in. |
| Whip Connection | Toggle joint (for wing screw or hat screw with key) |
| Weight | Z-version: Approx. 90 g / 0.19 lb. ZP4-version: Approx. 230 g / 0.51 lb. |
| Mounting | 21 mm dia. hole (For roof thicknesses 2 mm up to 7.5 mm mounting hole should be 22 mm dia.) |
| Mounting Plate Thickness | Max. 2.0 mm (Models up to 7.5 mm on request) |
Ordering Codes
| Model | Product No. | Additional Information |
|---|---|---|
|
Z-Mount |
130000396 | Z-mount (bright) with FME-system |
|
BZ-Mount |
130000398 | BZ-mount (black) with FME-system |
|
ZP4-Mount |
130000410 | ZP4-mount (bright) with 4 m cable and FME-connector |
|
BZP4-Mount |
130000412 | BZP4-mount (black) with 4 m cable and FME-connector |
|
ZP5 |
130000411 | ZP5-mount (bright) with 5 m cable and FME-connector |
|
BZP5-Mount |
130000408 | BZP5-mount (black) with 5 m cable and FME-connector |
Additional Information
Installation
The Z-mount is designed for mounting in a 21 mm dia. hole.
The whip is fastened to the mount by means of our standard ball joint and wing screw system. The adjustable ball joint ensures that the whip can always be mounted in a vertical position independent of the angle of the installation spot.
The Z-mount is particularly well suited for mounting on car roofs because of its ability to be installed exclusively with access from the outside. The Z-mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside.
However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.
A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.
1. Installation dimensions
2. Installation step
Do not use sealer on rubber gasket or other places.
Dimensions
Please note
The whips are normally installed on the mount by means of the standard wing screw, but may also be installed using the optional hat screw with key (accessory item).
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-28
Version 1