FME-System Accessories – Note
For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.
ZG-Mount
Low Profile Mobile Antenna Mount with Thread Stud
Description
- Used together with all Amphenol Procom ZG-type antenna whips.
- M8x1 thread whip-mounting system.
- For installation on horizontal surfaces (roof top or trunk lid) in a 21 mm dia. hole.
- Particularly well suited for rooftop-mounting because of very low internal protrusion and ability to be installed exclusively with access from the outside.
- Complete line of whips available for all communications bands up to 1300 MHz.
- Mounting body made of stainless steel!
- Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable).
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.
- ECE R118.02 approved cable.
Specification
| Electrical | |
| Model | ZG-Mount |
|---|---|
| Frequency | 0 – 1300 MHz |
| Application | Low-profile mount for mobile antennas |
| Mechanical | |
| Installation Diameter | 38 mm / 1.50 in. |
|---|---|
| Build-In Depth | 10.5 mm |
| Materials | Stainless steel Black chromed brass Environment-proof plastics |
| Installation Torque | 7.5 ± 1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Height | Approx. 28 mm / 1.10 in. |
| Whip Connection | M8 x 1 thread stud |
| Weight | ZG-version : Approx. 70 g / 0.15 lb. ZGP4-version: Approx. 210 g / 0.46 lb. |
| Mounting | 21 mm dia. hole |
| Mounting Plate Thickness | Max. 2 mm |
Ordering Codes
| Model | Product No. | Model |
|---|---|---|
|
ZG-Mount |
130000377 | ZG-Mount |
|
ZGP4-Mount |
130000388 | ZGP4-Mount |
|
ZGP5-Mount |
130000389 | ZGP5-Mount |
Additional Information
Installation
The ZG-mount is designed for mounting in a 21 mm dia. hole on horizontal surfaces as e.g. roof top or trunk lid, with access from the outside only.
A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.
The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low profile mobile mount with a slim appearance and with protection against theft of the antenna whip.
When cleaning the car in car-washing machines, the whip is easily removed using a fork spanner. The whip is refitted again by screwing it onto the thread stud and tightening it with the spanner.
1. Installation Dimension
2. Installation Steps
Do not use sealer on rubber gasket or other places.
PROCOM A/S reserves the right to
amend specifications without prior notice
PROCOM A/S • Smedetoften 12
DK 3600 Frederikssund • Denmark
Generated : 2026-06-28
Version 1