HPRS-S

Miniature Receiver Multicoupler series for the VLF through low VHF bands

Find Out More
View Variations
Data Sheet
CE Certification

Other Files

HPRS-S

Quickly identify the correct ordering code.

HPRS-S
Electrical
Power Supply 11 to 25 V DC @ approx. 0.15A
Model HPRS-S
Gain (Input To All Outputs) 2.0 dB ±2 dB
Frequency 10 kHz – 108 MHz
Noise Figure Typ. 5.0 dB @ 10 MHz
Typ. 6.5 dB @ 108 MHz
Output 3. Order Intercept point (OIP3) > +24 dBm @ 100 kHz to 108 MHz
Impedance 50 Ω
P1dB > +3 dBm @ 10 kHz
> +9 dBm @ 100 kHz to 108 MHz
Output 2. Order Intercept point (OIP2) > +55 dBm @ 1 MHz
> +38 dBm @ 54 MHz
Isolation between outputs Min. > 17 dB, typ. > 20 dB
Output-Input Isolation > 25 dB
Input VSWR < 3.0:1
Input-Output Isolation > 25 dB
Output VSWR < 3.0 @ 10 kHz
> 1.5 @ 100 kHz to 108 MHz
No. of channels 2 or 4
Environmental
Operating temperature range -30 °C to +50 °C
Ingress Protection IP31
Mechanical
Connection(s) N(f), TNC(f) or BNC(f)
Historic Brand Procom
Dimensions 129 x 152 x 35 mm /
5.08 x 5.98 x 1.38 in.
(incl. connectors and flanges)
Weight Approx. 0.42 kg / 0.93 lb.
Mounting 5 mm / 0.20 in. dia. (four holes)
  • Active wideband receiver multicoupler for the VLF, LF, MF, HF and
    low VHF bands with 1 input and 2 or 4 outputs.
  • For use where a number of receivers have to share the same antenna.
  • Ultra-wide frequency range: Covers 10 kHz – 108 MHz.
  • Other versions available:
  • HPRS : 30 MHz – 960 MHz
  • HPRS-U : 690 MHz – 2.7 GHz
  • High-dynamic range amplifier built in to compensate for loss
    in the multicoupler network.
  • High OIP2 and OIP3.
  • Low amplifier noise figure.
  • Built-in limiter to protect from input signals larger than 5Vpp.
  • Static discharge protected by gas discharge tube across the input.
  • Built-in high-pass filter to prevent overload from strong signals in
    the sub-VLF frequency bands.
  • High isolation between receiver outputs.
  • Wide wupply voltage range.
  • DC supply on solder terminal or 2.5 mm barrel connector.
  • Coated with black vinyl to prevent corrosion.
  • Available with N(f), TNC(f) or BNC(f) connector types.

No content found

This product doesn’t have any diagrams yet.

Model Product No. Additional Information Add To Quote

HPRS-S-2-N(f)

 210001948 OUTPUTS: 2

HPRS-S-2-TNC(f)

 210001954 OUTPUTS: 2

HPRS-S-2-BNC(f)

 210001955 OUTPUTS: 2

HPRS-S-4-N(f)

 210001949 OUTPUTS: 4

HPRS-S-4-TNC(f)

 210001956 OUTPUTS: 4

HPRS-S-4-BNC(f)

 210001957 OUTPUTS: 4

Login required

You need to be logged in into your account to view downloadable documents.

DC Power Supply Connection

Mounting Details

PRO MARHP4 HPRS4W Mountingholes

All dimensions are given in mm [in.]

Typical Gain and VSWR curve

HPRS S Curves

EU and UK Declaration of Conformity

Hereby Amphenol Procom declare that the product type HPRS-S is in compliance with EU Directive 2014/53/EU
and the UK Radio Equipment Regulations 2017 (S.I. 2017 No. 1206).
The full text of the Declaration of Conformity is available at:

https://s3.us-west-2.amazonaws.com/catsy.1080/Declaration-of-Conformity-HPRS-S.pdf

Power Supply AC/DC Linear 15 V 10 W

HPRS S Power supply