MU 906-X/…

Colinear 6 dB Mobile Antenna for the 900 MHz Band

Find Out More

Quickly identify the correct ordering code.

MU 906-X/…
Electrical
Model MU 906-X/…
Frequency 900 MHz-band covered by three models
Antenna Type Collinear mobile antenna
Max. Input Power 60 W
Polarisation Vertical
Impedance 50 Ω
VSWR < 1.2 @ f. res.
Bandwidth > 50 MHz @ VSWR < 1.5
> 100 MHz @ VSWR < 2.0
Gain (EIA RS-329-1) 6 dB
Mechanical
Materials Whip: Stainless steel and black-chromed brass
Mount: Black-chromed brass
Weather- and shockproof plastics
Stainless steel
Installation Torque 4 ±1 Nm
Colour Black
Historic Brand Amphenol Procom
Antenna Mount Type Hole Mount
Height Approx. 600 mm / 2.36 in.
Weight X-version: Approx. 100 g
XP4-version: Approx. 240 g
Mounting 18 mm dia. hole
  • 6 dB omnidirectional gain when mounted on the car roof.
  • Rear wing mounting possible with only minor reduction of gain.
  • 3 models, type “l”, “m” and “h”, cover band segments suiting the most common 900 MHz CELLULAR networks such as EAMPS, ETACS, NMT-900 and EGSM.
  • Excellent for use together with a diplexer (type LH 108/136) for combined car radio broadcast reception and 900 MHz transceiving.
  • Stainless steel X-mount with M6-thread whip-fastening system.
  • Simple mounting exclusively with access from the outside.
  • Models available with X-mount (oblong) and CX-mount (circular).
  • Choice between two connection principles:
  • X-mount: FME-connection (supplied without cable).
  • XP4-mount: Permanently attached 4 m low loss cable terminated with FME-connector.

No content found

This product doesn’t have any diagrams yet.

Model Product No. FrequencyAdditional Information Add To Quote

MU 906-X/l

130001191 824 – 894 MHz (EAMPS) X-mount (oblong) with FME-system

MU 906-X/m

130001195 872 – 950 MHz (ETACS) n/a

MU 906-X/h

130001187 880 – 960 MHz (EGSM&NMT-900) n/a

MU 906-CX/l

130001192 824 – 894 MHz (EAMPS) CX-mount (circular) with FME-system

MU 906-CX/m

130001196 872 – 950 MHz (ETACS) n/a

MU 906-CX/h

130001188 880 – 960 MHz (EGSM&NMT-900) n/a

MU 906-XP4/l

130001193 824 – 894 MHz (EAMPS) XP4-mount (oblong) with 4 m cable + FME-connector

MU 906-XP4/m

130001197 872 – 950 MHz (ETACS) n/a

MU 906-XP4/h

130001189 880 – 960 MHz (EGSM&NMT-900) n/a

MU 906-CXP4/l

130001194 824 – 894 MHz (EAMPS) CXP4-mount (circular) with 4 m cable + FME-connector

MU 906-CXP4/m

130001198 872 – 950 MHz (ETACS) n/a

MU 906-CXP4/h

130001190 880 – 960 MHz (EGSM&NMT-900) n/a

Login required

You need to be logged in into your account to view downloadable documents.

The whip is compatible with all below mounts

Installation

The shadowing effect of the car roof often produces deep nulls in the radiation pattern from short antennas mounted on trunk or wing. This problem is solved using the MU 906-X/… antenna.
Because of the colinear design this antenna provides a satisfactory omnidirectional gain even when mounted on trunk or wing. The X- and CX-mounts can be installed anywhere on the car. The oblong X-mount is especially suitable for mounting on the often very narrow strip on the rear wing between the trunk lid and the side of the car.
Mounting can take place exclusively with access from the outside when drilling an 18 mm dia. hole. Mounting can take place from the inside by drilling a 14 mm dia. hole.
When mounting in a 14 mm dia. hole, remove the bottom plastic ring of the packing gasket with a sharp cutter. When cleaning the car in car-washing machines, remove the whip using a spanner, size 9 mm.
After wash, refit the whip and tighten it lightly with the spanner. As the mount is internally equipped with a bendable section, the antenna can always be adjusted to an upright position independent of the tilt angle of the installation spot (up to 30° tilt).

1. Installation Dimensions

X CX Mount 18 GB

2. Installation Steps

X CX Mount inst step samlet GB

 Do not use sealer on rubber gasket or other places.

3. Tuning

The antenna is delivered factory-tuned and requires no further tuning.