| Electrical | |
| Model | MU 908-X/… |
|---|---|
| Frequency | Cellular networks operating within the range 824 – 960 MHz. See frequency segmentation below. |
| Antenna Type | ColLinear mobile glassfiber whip antenna |
| Max. Input Power | 60 W |
| Polarisation | Vertical |
| Impedance | 50 Ω |
| VSWR | ≤ 1.3 @ f. res. |
| Gain (EIA RS-329-1) | 6 dB (Tx – range), 4 dB (Rx – range) |
| Mechanical | |
| Materials | Whip : Sturdy, conical black-lacquered glass fibre tube Black-chromed metal parts Mount : Black-chromed brass Weather- and shockproof plastics Stainless steel |
|---|---|
| Installation Torque | 4 ±1 Nm |
| Colour | Black |
| Historic Brand | Amphenol Procom |
| Antenna Mount Type | Hole Mount |
| Height | Approx. 65 mm / 2.56 in. |
| Weight | X-version : Approx. 120 g / 0.26 lb. XP4-version : Approx. 260 g / 0.57 lb. |
| Mounting | 18 mm dia. hole |
This product doesn’t have any diagrams yet.
| Model | Product No. | Frequency | Additional Information | Add To Quote |
|---|---|---|---|---|
|
MU 908-X/l |
130001496 | 824 – 894 MHz (EAMPS) | X-mount (oblong) with FME-system | |
|
MU 908-X/m |
130001497 | 872 – 950 MHz (ETACS) | n/a | |
|
MU 908-X/h |
130001498 | 880 – 960 MHz (EGSM & NMT-900) | n/a | |
|
MU 908-CX/l |
130001220 | 824 – 894 MHz (EAMPS) | CX-mount (circular) with FME-system | |
|
MU 908-CX/m |
130001501 | 872 – 950 MHz (ETACS) | n/a | |
|
MU 908-CX/h |
130001221 | 880 – 960 MHz (EGSM & NMT-900) | n/a | |
|
MU 908-XP4/l |
130001420 | 824 – 894 MHz (EAMPS) | XP4-mount (oblong) with 4 m cable + FME-system | |
|
MU 908-XP4/m |
130001499 | 872 – 950 MHz (ETACS) | n/a | |
|
MU 908-XP4/h |
130001500 | 880 – 960 MHz (EGSM & NMT-900) | n/a | |
|
MU 908-CXP4/l |
130001502 | 824 – 894 MHz (EAMPS) | CXP4-mount (circular) with 4 m cable + FME-system | |
|
MU 908-CXP4/m |
130001503 | 872 – 950 MHz (ETACS) | n/a | |
|
MU 908-CXP4/h |
130001504 | 880 – 960 MHz (EGSM & NMT-900) | n/a |
You need to be logged in into your account to view downloadable documents.
The shadowing effect of the car roof often produces deep nulls in the radiation pattern from short antennas mounted on trunk or wing. This problem is solved using the MU 908-X/…-antenna. Because of the colinear design this antenna provides a satisfactory omnidirectional gain even when mounted on trunk or wing. The X- and CX-mounts can be installed anywhere on the car.
The oblong X-mount is especially suitable for mounting on the often very narrow strip on the rear wing between the trunk lid and the side of the car. Mounting can take place exclusively with access from the outside when drilling an 18 mm dia. hole. Mounting can take place from the inside by drilling a 14 mm dia. hole. When mounting in a 14 mm dia. hole, remove the bottom plastic ring of the packing gasket with a sharp cutter.
When cleaning the car in car-washing machines, remove the whip using a spanner, size 9 mm. After wash, refit the whip and tighten it lightly with the spanner. As the mount is internally equipped with a bendable section, the antenna can always be adjusted to an upright position independent of the tilt angle of the installation spot (up to 30° tilt).
Do not use sealer on rubber gasket or other places.
The antenna is delivered factory-tuned and requires no further tuning.
To help selecting the correct model for a specific cellular network please consult the survey of cellular network frequencies under USEFUL DATA in our catalogues.
Click below to sign up for our monthly newsletter to keep informed about our latest products and news from Amphenol Procom.
