ProFin

A multi purpose shark fin antenna for LTE450 UHF, GNSS, GPS, 2G/3G/4G and dual WiFi 2.4 + 5.0 GHz

Find Out More
View Variations
Data Sheet
CE Certification

Other Files

ProFin

Quickly identify the correct ordering code.

ProFin
Electrical
Model ProFin
Frequency UHF : 380 – 470 MHz (in three models)
WIFI : 2300 – 2500 MHz, 5000 – 6000 MHz
4G : 698 – 960 MHz, 1710 – 2700 MHz
Antenna Type Mobile Shark Fin Style Antenna
Max. Input Power 10 W for built-in UHF
25 W for 4G Antenna
100 W for whip
Polarisation Vertical
Pattern Type Omnidirectional
Impedance 50 Ω
VSWR < 2.0:1 (< 2.5:1 for 698 -960 MHz)
Gain (EIA RS-329-1) Varies over frequency (see gain table and plots)
Environmental
Operating temperature range -50 °C to +75 °C
Ingress Protection IP67
Mechanical
Compliance ECE R118.02 approved cable
Antenna Colour Black (RAL 9005)
Connection(s) SMA(m) (all antennas)
Materials Reinforced PA, Zamak 5
Installation Torque 4 ± 0.5 Nm
Historic Brand Amphenol Procom
Antenna Mount Type Hole Mount
Dimensions Approx. 76 x 142.5 mm / 2.99 x 5.61 in.
Height Approx. 66 mm / 2.6 in.
Max. Roof Thickness 3 mm / 0.12 in.
Whip Connection M5
Weight Approx. 0.26 kg / 0.57 lb.
Mounting 18.5 mm / 0.8 in. dia. hole
Max roof curvature : 2.0 mm / 0.08 in.
(on 142 mm)
  • Can be configuered as 3in1, 4in1, and 5in1
  • In-built UHF antenna available.
  • In-built 4G antenna (698 – 960 MHz and 1710 – 2700 MHz).
  • GNSS antenna for GPS L1, Glonass, Beidou and Galileo.
  • Model available with optional antenna for GPS L1.
  • Dual WiFi 2.4 and 5.0 GHz.
  • Supports external whip.
  • No diplexer needed.
  • The ProFin provides antennas for multiple technologies.
  • The ProFin covers UHF, GNSS, GPS L1, 2G/3G/4G cellular bands,
  • dual WiFi 2.4 and 5.0 GHz and an optional whip.
  • The ProFin can support antenna whip in the range 66 – 520 MHz.
  • All ProFin configurations are prepared for external whip.
  • Easily removable whip for car wash.
  • Full hemispherical coverage for the GNSS and GPS.
  • Built-in high gain, low noise amplifier.
  • Preselector filter ensures high GNSS/GPS amplifier blocking level for out-of-band signals.
  • Right-Hand Circular Polarization (RHCP).
  • 3 – 15 V DC for GNSS/GPS supply.
  • DC supply via GNSS or GPS RF-connector.
  • ECE R118.02 approved cable.

No content found

This product doesn’t have any diagrams yet.

Model Product No. Additional Information Add To Quote

ProFin G1-S/S/S/S

 132000230 4G, WIFI,GNSS

ProFin G2-S/S/S/S

 132000231 4G, WIFI,GNSS,GPS

ProFin G1-395-S/S/S/S/S

 132000232 4G, WIFI,GNSS,UHF 380 – 410 MHz

ProFin G1-430-S/S/S/S/S

 132000233 4G, WIFI,GNSS,UHF 410 – 450 MHz

ProFin G1-450-S/S/S/S/S

 132000234 4G, WIFI,GNSS,UHF 430 – 470 MHz

ProFin G2-395-S/S/S/S/S

 132000236 4G, WIFI,GNSS,GPS,UHF 380 – 410 MHz

ProFin G2-430-S/S/S/S/S

 132000237 4G, WIFI,GNSS,GPS,UHF 410 – 450 MHz

ProFin G2-450-S/S/S/S/S

 132000238 4G, WIFI,GNSS,GPS,UHF 430 – 470 MHz

Login required

You need to be logged in into your account to view downloadable documents.

Shown with optional external whip.

ProFin Profilback1

Gain Table for In-built Antennas
TYPEFREQUENCY (MHz) PEAK GAIN (dBi)AVERAGE GAIN H-PLANE (dBi)AVERAGE GAIN H-PLANE (dBq) *
UHF element 400 -3.0 -7.0 -6.5
2G/3G/4G element 700
900
1800
2500		 4.0
4.0
5.0
9.0		 -1.5
-1.0
-1.0
1.0		 -1.0
-0.5
0.0
1.5
WIFI element 2400
5500		 5.0
6.0		 -2.0
-2.0		 -2.0
-3.0

* According to TIA-329.2-C

Nomenclature

Use the guide below to configure the ProFin you would like to order.

Model NameNo. of GNSSInternal UHF antennaCable length(m)Connectors on GNSSConnectors on LTEConnectors on WIFIConnectors on internal UHF antennaConnectors on external whip antenna
ProFin -Blank when no GNSS
G1
G2		 -Blank when no internal UHF
-395
-430
-450		 Blank (approx. 0.3 m / 1 ft cable length)
-P5 (5 m / 16.4 ft cable length)		 -Blank when no GNSS
-S (SMA-M)

-FC (FAKRA code C)		 /S (SMA-M)


/FD (FAKRA code D)		 /Blank when no WIFI
/S (SMA-M)
/RP-S (Reverse Polarity SMA-M)
/FI (FAKRA code I)		 /Blank when no internal UHF
/S (SMA-M)

/FX (FAKRA X= code)		 /Blank when no external whip antenna
/S (SMA-M)

/FX (FAKRA X= code)
Naming Example        
ProFin G1 -395 -P5 -S /S /RP-S /S /S


Examples

ProFin G1-395-P5-S/S/RP-S/S/S

ProFin G1-S/S/S/S

Ordering Designations – Whip Matrix
TYPEDESCRIPTION VHF
66-88 MHz		 FM
88-108 MHz		VHF
144..240 MHz		UHF
380..470 MHz		UHF (Gain)
380..470 MHz
MP-SS-S/80/…whip Stainless steel whip with shock spring. ♦        
MP-SS-S/FM whip Stainless steel whip with shock spring.   ♦      
MP-SS-S/150 whip Stainless steel whip with shock spring.   ♦ ♦    
MP-SS-S/DAB whip Stainless steel whip with shock spring.   ♦ ♦    
MP-B/450/…whip Flexible whip
(0 dB acc. to TIA-329.2-C)		       ♦  
MP-SS/450-4/…whip Stainless steel collinear whip
(4 dB acc. to TIA-329.2-C)		         ♦
MP-G-S/150/450/…/…whip Flexible whip with shock spring (factory adjusted)     ♦ ♦  
MP-G-S/450/FM/… whip Flexible whip with shock spring (factory adjusted)   ♦   ♦  


For more information we refer to the corresponding whip datasheets. The in-built antennas can be used without an external ground-plane, but with degraded electrical performance.

Whip Models

Typical VSWR Curves
TYPICAL VSWR CURVE INBUILT-UHF *
TYPICAL VSWR CURVE WIFI 2.4 GHz *
TYPICAL VSWR CURVE 2G / 3G / 4G *
     
TYPICAL VSWR CURVE WIFI 5.6 GHz * TYPICAL VSWR CURVE INBUILT-UHF WITH WHIP **  
     

* VSWR measured with no whip and 5 m (197 in.) of RG58 cable on a 1000 x 1000 mm (39 x 39 in.) ground plane.
** VSWR measured with collinear whip and 5 m (197 in.) of RG58 cable on a 1000 x 1000 mm (39 x 39 in.) ground plane.

Radiation Patterns
4G-element 700 MHz, side view
4G-element 700 MHz, top view
4G-element 900 MHz, side view
4G-element 900 MHz, top view
 
 
 
 
 4G-element 1800 MHz, side view  4G-element 1800 MHz, top view  4G-element 2100 MHz, side view  4G-element 2100 MHz, top view
 
 
 
 
 4G-element 2600 MHz, side view
 4G-element 2600 MHz, top view
 WIFI-element 2400 MHz, side view
 WIFI-element 2400 MHz, top view
 
 
 
 
 WIFI-element 5600 MHz, side view
 WIFI-element 5600 MHz, top view
 UHF-element 380 MHz, side view
 UHF-element 380 MHz, top view
 
 
 
 
EU and UK Declaration of Conformity

Hereby Amphenol Procom declare that the product type ProFin is in compliance with EU Directive 2014/53/EU and
the UK Radio Equipment Regulations 2017 (S.I. 2017 No. 1206).
The full text of the Declaration of Conformity is available at

https://s3.us-west-2.amazonaws.com/catsy.1080/Declaration-of-Conformity-ProFin.pdf

Accessories – Cables

ProFin Cables

5 m ProFin Cable Kit.
6 pcs. RG 174 cables in one cable bundle (ø9 mm).
Provides ease of installation.

By selecting the proper ProFin model, following recommendations must be considered:
  1. We recommend not to use an external whip on ProFin models with in-built UHF antenna, since performance of the UHF antenna will be degraded.
  2. If an external whip is used on a ProFin model with in-built UHF antenna, the tuning frequency/operating frequency of the external whip must be minimum 50 MHz apart from the center frequency of the in-built UHF antenna.
    Example: For ProFin G1-395 / ProFin G2-395, the tuning frequency/operating frequency of the external whip must be ≤ 345 MHz or ≥ 445 MHz.
  3. Max. recommended frequency of an external whip is 520 MHz.
  4. If more than 10 W is needed in the UHF band, we recommend using an external whip on a ProFin model without in-built UHF antenna or on a ProFin Plus model.
Mounting Details

Important: The whip should always be dismounted during car wash.

Related Accessories

MP-SS-S/FM whip

¼ λ Whip with a Shock Spring for the FM Band

£0.00 £0.00 (Exc. VAT)

MP-SS-S/150 whip

¼ λ Whip with Shock Spring for the 150 MHz Band

£0.00 £0.00 (Exc. VAT)

MP-SS-S/DAB whip

¼ λ Whip with a Shock Spring for the DAB Band

£0.00 £0.00 (Exc. VAT)

MP-G-S/150/450/FQ whip

Dual band whip with Shock Spring for the 150 MHz and 450 MHz bands

£0.00 £0.00 (Exc. VAT)

MP-G-S/450/FM/… whip

Dual band whip with Shock Spring for the 450 MHz band and FM

£0.00 £0.00 (Exc. VAT)